TLG ENTERPRISES AUTO SALES

CarS, trucks & more

I AM CURRENTLY PLANNING ON RETIREMENT, THUS, MUCH OF THIS WEB SITE WILL BE DEDICATED TO MANY ITEMS FOR SALE, INCLUDING TOOLS, EQUIPMENT, COLLECTIBLES, COLLECTOR CARS, AND WHO KNOWS WHAT ELSE??
39 STEEL WILLYS32 PROJECT32 ROADSTER39 PLYMOUTH RODcolorado wheelsh1 cti wheelsTOOLS & EQUIPMENT
ABOVE IS TERRY'S INVENTORY JEFF'S INVENTORY LINK IS BELOW
JEFF'S WEB LINK
HAVE ANY QUESTIONS?
CONTACT US
SCROLL DOWN FOR: * COMBO metal lathe, mill, drill * LENCO spot welder * DREIS & KRUMP 8' x 14 gauge Metal Brake * NIAGRA 6' x16 Gauge power sheer * 48" WIDE, Dbl door bead blast cabinet * UNIRAM water borne paint gun cleaner * DVORAK SCOTCHMAN iron worker
3 in 1 COMBINATION LATHE/MILLING/DRILLING MACHINE WITH STAND TOOLING AND ACCESSORIES - $1700 SCROLL DOWN
I purchased this new @ Harbor Freight, and used very little. Combo lathe, mill, drill. Lots of tooling, inside & outside chuck jaws. Steel stand with drawers. Lots of specs on photos. Light surface rust on some bare metal parts, "not pitted" New cost for all included approx $3500, My Price $1700 Call or Text Terry 717.514.4350 Elizabethtown, Pa.
LENCO SPOT WELDER - $550 SCROLL DOWN
Had it many years & always worked well, 230 VOLT, 50 AMP New cost approx. $1500 - My Price $550 Call or Text Terry 717.514.4350 Elizabethtown, Pa.
DREIS & KRUMP 8' x 14 GAUGE BRAKE - $2000 SCROLL DOWN
Had this a long time and still in use. Capacity is 8' long, 14 gauge max. Used similar US Made units are prices around $3000, My Price - $2000 Call or Text Terry, 717.514.4350 Elizabethtown, Pa.
NIAGRA 72" X 16 GAUGE POWER SHEER - $4000 SCROLL DOWN
Still in use, Never failed me, Still cuts sharp & clean, Keep fingers FAR away! Runs on standard 230 volt single phase, Cap. (6 FT.) 72" wide x 16 gauge max. Similar units are hard to find used and a fortune new. Used 5FT. units everywhere & priced at $4500 & up. My Price $4000 Call or Text Terry 717.514.4350 Elizabethtown, Pa.
DVORAK SCOTCHMAN IRON WORKER - $3500 SCROLL DOWN
Most used tool in my shop & still in use. Shows wear, but still works fine, Has square 3/4"ish changeable punch die, and no others included. See photos for specs. Standard 230 volt single phase. Many used on web. Most 3 phase Most not priced, but $4500 & up seems about right. My Price $3500
SANDBLAST CABINET, 48" WIDE, DBL DOOR - $600 SCROLL DOWN
48" Wide, Doors at both ends, Hook shop vac to it for venting. Could use a new glass & some wear parts in gun. Currently still in use. Similar units this big around $2000. My Price $600 Call or Text Terry 717.514.4350 Elizabethtown, Pa.
UNI-RAM WATER BORNE PAINT GUN CLEANER - $400 READ FULL DESCRIPTION PLEASE SCROLL DOWN
Never used this tool. They cost a lot of money. Not sure if it can be used for solvent based paint guns? You see the new cost, so there is lots of $$ room to modify it if a solvent application pump or hoses are needed. My Price $400
BLANK LOT, CHECK BACK!!
BLANK LOT, CHECK BACK!!
Copyright © 2021 Network Solutions, LLC. All rights reserved.