2016 COLORADO WHEELS/TIRES Still available!

USED A COUPLE YEARS, 60% TREAD, BED COVER IS SOLD
DetailsAT AUCTION - Set of 4 Torq Thrust Chrome Wheels/TiresFrom my 2016 Chevy Colorado Pickup, as pictured. (CHECK YOUR BOLT CIRCLE DIAM. THESE ARE 6 on 120mm)Include spline drive lug nuts, Wheels near new conditionTire size is 265/50R 20, tires approx 60% treadNEW COST approx. $1800I'm Terry, Call or Text me @ 717.514.4350. Located in Elizabethtown, Pa. 17022
SCROLL DOWN FOR: * COMBO metal lathe, mill, drill * LENCO spot welder * DREIS & KRUMP 8' x 14 gauge Metal Brake * NIAGRA 6' x16 Gauge power sheer * 48" WIDE, Dbl door bead blast cabinet * UNIRAM water borne paint gun cleaner * DVORAK SCOTCHMAN iron worker
3 in 1 COMBINATION LATHE/MILLING/DRILLING MACHINE WITH STAND TOOLING AND ACCESSORIES - $1700 SCROLL DOWN
I purchased this new @ Harbor Freight, and used very little. Combo lathe, mill, drill. Lots of tooling, inside & outside chuck jaws. Steel stand with drawers. Lots of specs on photos. Light surface rust on some bare metal parts, "not pitted" New cost for all included approx $3500, My Price $1700 Call or Text Terry 717.514.4350 Elizabethtown, Pa.
LENCO SPOT WELDER - $550 SCROLL DOWN
Had it many years & always worked well, 230 VOLT, 50 AMP New cost approx. $1500 - My Price $550 Call or Text Terry 717.514.4350 Elizabethtown, Pa.
DREIS & KRUMP 8' x 14 GAUGE BRAKE - $2000 SCROLL DOWN
Had this a long time and still in use. Capacity is 8' long, 14 gauge max. Used similar US Made units are prices around $3000, My Price - $2000 Call or Text Terry, 717.514.4350 Elizabethtown, Pa.
NIAGRA 72" X 16 GAUGE POWER SHEER - $4000 SCROLL DOWN
Still in use, Never failed me, Still cuts sharp & clean, Keep fingers FAR away! Runs on standard 230 volt single phase, Cap. (6 FT.) 72" wide x 16 gauge max. Similar units are hard to find used and a fortune new. Used 5FT. units everywhere & priced at $4500 & up. My Price $4000 Call or Text Terry 717.514.4350 Elizabethtown, Pa.
DVORAK SCOTCHMAN IRON WORKER - $3500 SCROLL DOWN
Most used tool in my shop & still in use. Shows wear, but still works fine, Has square 3/4"ish changeable punch die, and no others included. See photos for specs. Standard 230 volt single phase. Many used on web. Most 3 phase Most not priced, but $4500 & up seems about right. My Price $3500
SANDBLAST CABINET, 48" WIDE, DBL DOOR - $600 SCROLL DOWN
48" Wide, Doors at both ends, Hook shop vac to it for venting. Could use a new glass & some wear parts in gun. Currently still in use. Similar units this big around $2000. My Price $600 Call or Text Terry 717.514.4350 Elizabethtown, Pa.
UNI-RAM WATER BORNE PAINT GUN CLEANER - $400 READ FULL DESCRIPTION PLEASE SCROLL DOWN
Never used this tool. They cost a lot of money. Not sure if it can be used for solvent based paint guns? You see the new cost, so there is lots of $$ room to modify it if a solvent application pump or hoses are needed. My Price $400
BLANK LOT, CHECK BACK!!
BLANK LOT, CHECK BACK!!
Copyright © 2021 Network Solutions, LLC. All rights reserved.